Hidden Spy Charging Dock Nanny Camera with Motion Detection, Invisible Lens, Video Recorder for Home Security and Surveillance(IOS Charger)
NOTICE ABOUT WIFI SETING:
Before you start to set the WiFi connection,please note:
Plug into the USB power directly.
Keep the camera and the WiFi router within 3-5 meters
Supports 2.4GHz only, if router is 5GHz, please switch to 2.4GHz, and make sure DHCP is on.
Make sure your phone/tablet has connected to WiFi.
Now set the camera,If failed,please RESET the camera and set it again.
If failed again,please:
Check the WiFi password to see if it has special characters,such as %$#@* ect. if it has,please change the password with normal characters.
Turn off the WiFi route and turn on after 1 minute,or just RESET it.
Check the RED light from the back side of the camera(remove back cover first).
light off:no wifi connection
light solid:wifi connected
light blink:waiting for connect wifi
And please set WiFi again.
Special Situation:
If you use the AP connection,the App will tell you connection failed,but actually it may has succeeded,you need to do this:
Open App,Click "+" ,then click "Manual Input ID"
Input the camera UID,you can find it below the QR cord on backside of the camera.Then input the password of the camera and Save.Default password is admin.
Does this have night vision?
No, we did not add night vision function to it because night vision needs infrared light which means others may notice it is a camera.
Before you start to set the WiFi connection,please note:
Plug into the USB power directly.
Keep the camera and the WiFi router within 3-5 meters
Supports 2.4GHz only, if router is 5GHz, please switch to 2.4GHz, and make sure DHCP is on.
Make sure your phone/tablet has connected to WiFi.
Now set the camera,If failed,please RESET the camera and set it again.
If failed again,please:
Check the WiFi password to see if it has special characters,such as %$#@* ect. if it has,please change the password with normal characters.
Turn off the WiFi route and turn on after 1 minute,or just RESET it.
Check the RED light from the back side of the camera(remove back cover first).
light off:no wifi connection
light solid:wifi connected
light blink:waiting for connect wifi
And please set WiFi again.
Special Situation:
If you use the AP connection,the App will tell you connection failed,but actually it may has succeeded,you need to do this:
Open App,Click "+" ,then click "Manual Input ID"
Input the camera UID,you can find it below the QR cord on backside of the camera.Then input the password of the camera and Save.Default password is admin.
Does this have night vision?
No, we did not add night vision function to it because night vision needs infrared light which means others may notice it is a camera.