NexTrend Solar Wireless Security Camera overview
This wireless security camera adopts all-metal shell, IP66 high waterproof grade, 6600mAh solar-powered battery supply, charging through the cover solar panel, no wiring, no cords, maintenance-free, suitable for all kinds of inconvenient outdoor environment use, villas, community, courtyard, fish ponds, orchards, vegetable plots, outdoor pet house and so on. 130 degree wide angle and highly sensitive PIR motion sensor offer Instant and almost no false alarms. No human movement can slip through without your notice. It will be woken up at once when you access the camera for live streaming or when motion events are detected. Even there is a network interruption, PIR alarm can normally be triggered and recording.
Specifications
Image Sensor: 1/3 million pixel CMOS
Lens: 3.6MM Million HD Lens
Resolution: FHD 1080P, 2 million pixels
Frame Rate: 25 Frames
Battery: 6600mAh lithium polymer battery
Intelligent Alarm: PIR Human Temperature Detection
Wireless Frequency: 2.4GHz IEEE 802.11b/g/n( NOT support 5GHz WIFI)
Infrared Light: 8 infrared light, 850nm, effective distance of 32Ft
Video Compression Standard: H. 264, support for dual-code flow
Storage: Support Micro SD card up to 32GB
Audio Input: Built-in mic
Audio Output: Built-in speaker
Day and Night Conversion Mode: IR-Cut Double Filter Automatic Switch, up to 65ft
Working Environment: 14℉-140℉ / 20% - 85% (Non condensation)
Warm Notice:
1.First time use, please turn on the camera by holding the Power button for 8 seconds then release. The camera prompts you ‘welcome to use’. Before configure through the APP, reset the camera firstly by holding the Reset button for 6~8 seconds then release.
2.For safety during shipping and storage, this camera is in low-battery. Please fully charge it with a 5V/2A power adaptor for 20 hours. Please don't use 5V/9V adaptive power or flash fast charging source otherwise it will burn equipment circuit, resulting in damag.
3.Device configuration is successful, please set the PIR alarm at on and follow the installation as below to make the PIR alarm in most effective angle. Make sure no barriers in front of the camera lens.
A.If you want to put the camera on the flat table, please place it at the height of 4.5 ~ 6 feet.
B.If you want to install the camera on the wall, please install it at the height of 8.2 ~ 10 feet. After fix it, please adjust the lens and keep it downward 15°~ 20°
C.The PIR alarm distance is about 26 feet after you place the camera under most reasonable angle.
4.To offer a better experience, the APP will update time to time. To get the detailed and latest user manual, please check the Product information >Technical Specification part in the listing.
5. Search 'NexTrend Solar Security Camera' on YouTube to get video instruction.
